Mendiagnosa PC pada saat POST dengan kode Suara atau pesan


Kita dapat mengenali masalah yang terjadi pada PC (pada saat POST) dengan kode suara maupun pesan. Sehingga kita bias langsung mengetahui apa yang rusak pada PC tanpa harus bingung.
Kode PC pada saat POST itu berbeda beda dan tergantung bios yang kita gunakan.
Kode Suara
Kode Suara
Kemungkinan daerah kerusakan
Tanpa beep Power Supply
Beep terus menerus Power Supply
Beep pendek berulang-ulang Power Supply
1 beep panjang dan 1 beep pendek
Motherboard
1 beep panjang dan 2 beep pendek
Video adapter Card
1 beep pendek dan tidak ada tampilan
Kabel monitor dan atau tampilan
1 beep pendek dan tidak mau boot
Kabel disk, adapter disk atau disk
Macam – macam kode pada PC dengan Bios yang berbeda :
Kode Beep pada BIOS AMI
Beep Code
Descriptions
1 short
DRAM refresh failure
2 short
Parity circuit failure
3 short
Base 64K RAM failure
4 short
System timer failure
5 short
Process failure
6 short
Keyboard controller Gate A20 error
7 short
Virtual mode exception error
8 short
Display memory Read/Write test failure
9 short
ROM BIOS checksum failure
10 short
CMOS shutdown Read/Write error
11 short
Cache Memory error
1 long, 3 short
Conventional/Extended memory failure
1 long, 8 short
Display/Retrace test failed
Award BIOS Beep Codes
Beep Code
Description
1 long, 2 short
Indicates a video error has occurred and the BIOS cannot initialize the video screen to display any additional information
Any other beep(s)
RAM problem.
IBM BIOS
Beep Code
Description
No Beeps
No Power, Loose Card, or Short.
1 Short Beep
Normal POST, computer is ok.
2 Short Beep
POST error, review screen for error code.
Continuous Beep
No Power, Loose Card, or Short.
Repeating Short Beep
No Power, Loose Card, or Short.
One Long and one Short Beep
Motherboard issue.
One Long and Two short Beeps
Video (Mono/CGA Display Circuitry) issue.
One Long and Three Short Beeps.
Video (EGA) Display Circuitry.
Three Long Beeps
Keyboard / Keyboard card error.
One Beep, Blank or Incorrect Display
Video Display Circuitry.



Kode Pesan Kesalahan
Kode
Uraian
1xx
Kerusakan sistem board
101
Kerusakan sistem board pada interrupt
102
Kerusakan sistem board pada timer
2xx
Kerusakan memory RAM
201
Tes RAM rusak
3xx
Kerusakan keyboard
301
Keyboard tidak terespon
6xx
Kerusakan POST floppy drive atau adapter
601
Kerusakan floppy drive
17xx
Kerusakan hard disk
1701
Kerusakan POST pada unit hard disk
18xx
Kerusakan Unit I/O ekspansi
1801
Kerusakan POST pada Unit I/O ekspansi
Previous
Next Post »